TESCOFLEX® low-profile, unmetered underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of applications. The 24-000NR Unmetered TESCOFLEX® low-profilepedestal provides power distribution rated for 120 to 480 volts; single phase or three phase applications; and 1, 2 or 3 pole main breakers.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, unmetered underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 23-000NR Unmetered TESCOFLEX® low-profilepedestal provides power distribution rated for 120 to 480 volts; single phase or three phase applications; and 1, 2 or 3 pole main breakers.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, unmetered underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 22-000NR unmetered TESCOFLEX® low-profilepedestal provides power distribution rated for 120 to 480 volts; single phase or three phase applications; and 1, 2 or 3 pole main breakers.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
The 27-22BBS Single Meter TESCOFLEX®, manufactured by Tesco Controls, Inc., is a self-contained, battery backup system and metered underground service distribution and control pedestal. It is designed to provide hours of uninterrupted power through weather outages and other disturbances, providing safety for drivers and law enforcement officials under hazardous conditions. It has become the standard for hundreds of agencies and departments of transportation throughout the United States and Canada. The 27-200BBS also provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCO’s 22-000BBS cabinets, with all-welded construction and stainless steel hardware, are built to NEMA and UL 508A standards, and wired to conform to NEC and UL standards. The system is appropriate for retrofit projects or new installations, installed free-standing on a concrete base.
Due to varying municipal and DOT standards, TESCO manufactures BBS systems to meet specific client requirements, including design and architectural aesthetics.
The TESCO 24-200BBS is a self-contained, traffic signal battery backup system incorporated into aTESCOFLEX® metered underground service distribution and control pedestal. It is designed to provide hours of uninterrupted power through weather outages and other disturbances, providing safety for drivers and law enforcement officials under hazardous conditions. It has become the standard for hundreds of agencies and departments of transportation throughout the United States and Canada. The 24-200BBS also provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCO’s 24-200BBS cabinets, with all-welded construction and stainless steel hardware, are built to NEMA and UL 508A standards, and wired to conform to NEC and UL standards. The system is appropriate for retrofit projects or new installations; and can be side-mounted to an existing controller cabinet, or installed free-standing on a concrete base.
Due to varying municipal and DOT standards, Tesco Controls, Inc. manufactures BBS systems to meet specific client requirements, including design and architectural aesthetics.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals/switchgear, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 24-200 Single Meter TESCOFLEX® low-profileswitchgear provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCOFLEX® switchgear are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals/switchgear, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 24-200LBS Single Meter TESCOFLEX® low-profileswitchgear provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCOFLEX® switchgear are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 28-105 Single Meter TESCOFLEX® low-profile, slimlinepedestal provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 27-100 Single Meter TESCOFLEX® low-profile, slimlinepedestal provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp. The 27-100 model is also available in an unmetered pedestal.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 27-000 Single Meter TESCOFLEX® low-profile, slimlinepedestal provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp. The 27-000 model is also available in an unmetered pedestal.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 26-100 Single Meter TESCOFLEX® low-profile, slimlinepedestal provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp. The 26-100 model is also available in an unmetered pedestal.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
TESCOFLEX® low-profile, single-meter underground service distribution and control pedestals, manufactured by Tesco Controls, Inc., are used for a wide variety of municipal applications. The 26-000 Single Meter TESCOFLEX® low-profile, slimlinepedestal provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp. The 26-000 model is also available in an unmetered pedestal.
TESCOFLEX® pedestals are constructed of the highest grade materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
The TRANS-TRAP, manufactured by Tesco Controls, Inc., is a 12-stage (6 line side and 6 load side) surge arrestor for analog signal loop applications requiring maximum lightning and transient power surge protection. A unique 6 stage-per-conductor circuit traps and diverts the majority of transients allowing self-restoration of the process signal. In the event of extremely high transients, replaceable components disrupt and isolate damaging surges from critical control components, thus maintaining the integrity of the control system. Independently reacting line-to-ground discharge components and series dampening circuits are configured to provide these unique 6 stages of protection:
Triple spark gap dissipater provides high transient line-line and line-ground current diversion.
Dual input current limiting fast blow fusing provides input circuitry protection.
The APT pressure transmitter provides accurate linear pressure sensing in ranges from 0 – 1.3 to 0 – 15 PSI. A solid-state piezoresistive silicon element into which a Wheatstone bridge has been diffused offers a high degree of accuracy and long term stability. High resistance burden compensation and 12-98 VDC loop power design allows the APT to be remotely located, several miles from the receiver/source, without degrading accuracy or operation. A unique 12 stage lightning/surge protection circuit, TESCO TRANS-TRAP, may be incorporated to provide optimum circuit protection in harsh environments where lightning protection is a serious concern. Multiple APT’s can be direct panel mounted on 2 inch centers, with front panel adjustments, eliminating the requirement for external transmitter enclosures and costly field wiring.
Applications
Reactive Air® and bubbler applications
Anywhere continuous air pressure monitoring is needed
The Reactive Air Level Monitor by Tesco Controls, Inc., is a trapped-air fluid level monitoring instrument designed for application in most liquids and slurries in wastewater, storm water, and fresh water systems. This technology offers and elegantly simple solution for measuring fluid levels with extreme reliability and accuracy, in liquids containing up to 30% solids.
TESCO’s Reactive Air Level Monitor consists of a compression bell connected by a sensing tube to a remotely mounted pressure transmitter. The principal of operation is based on the fact that a change in fluid level outside the bell will compress the trapped air column proportional to the change in fluid level.
Small changes in level within the bell, correspond with a significant change in pressure at the pressure transmitter providing superior accuracy. An integral compressor is used to purge the compression bell. During the purge cycle, the level seen by the pressure transmitter is frozen using onboard electronics. A solenoid valve automatically isolates the pressure transmitter from the sensing line during the purge cycle, eliminating undue shock to the pressure sensing element.
TESCO’s Reactive Air Level Monitor is immune to solids build-up and inaccuracies resulting from foaming or fluid separation. Since no electronics or electrical conductors are used between the bell and the pressure transmitter, high noise immunity is realized.
Applications
High suspended solids level measurement, including raw sewage (up to 30% solids)
Wet well level measurement
Open tank or basin level measurement
Benefits
Simplified operation
Increased system reliability
Cost-effective
Simple installation
No maintenance
Standard Features
Choose from 120VAC or 12VDC
High-strength polymer bell resists corrosion and material build-up
Not susceptible to inaccuracies due to foaming or solids build-up
Self-cleaning utilizing manual or auto purge
High noise immunity
Operation can continue without power for compressor, for up to 30 days
Wide variety of pressure ranges available
Compression bell can be mounted up to 1000 feet from pressure transmitter
Output hold during purge, with adjustable duration
Optional surface mounted cabinet
Optional digit display provides visual indication of measured level
Combining new technology with a familiar device, the Opti-Float® level detector is a revolutionary innovation in discrete level detectors. It’s made of safe, recyclable materials. It’s mercury and lead free and is built to last for years of service.
The design of the Opti-Float® level detector is amazingly simple. Using fiber optic cable, it transmits a beam of light from an LED in a remote transceiver down to the float, where the beam makes and breaks depending on the tilt of the float. When the transceiver detects the presence or absence of light, it activates a relay in the transceiver, which can then operate other devices. The transceivers are all dual din rail mounted units, which can connect to two floats. Additional transceivers can be used for additional floats.
The fiber optic cable, created specifically for the Opti-Float® level detector, requires no special tools for connection. And while it looks similar to other float cables, there is one huge exception: No electrical wires and inherently safe!
So now, for the first time, floats can be used directly without special equipment in hazardous locations.
Low-profile, Motor Control Panels manufactured by Tesco Controls, Inc. are used for a wide variety of applications. The 24-000 low-profile panel provides power distribution rated for 120 to 480 volts; single phase or three phase applications; and 1, 2 or 3 pole main breakers.
TESCOFLEX® panels are constructed of the highest grade of materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
Applications
Switchgear
Power distribution equipment
Motor starters
Variable frequency drives (VFDs)
Contactors
Programmable logic controllers (PLCs)
Wastewater lift stations
Water pumping plants
New installations and retrofit of existing installations
Other electrical and electronic equipment found in water, wastewater, and similar industries
Standard Features
Low Profile
No exposed fasteners
Hot-dipped galvanized steel, stainless steel or aluminum
Durable all-welded construction
UL approved copper cable bussing and control wiring
Circuit breakers cable-in cable-out type
Factory wired and tested before shipment
Built to UL 508A standards
Pad-lockable 3-pt latch
Component Options
Breakers
Contactors
Switches
Relays
Photo cells
Time clocks
Time delays
Transformers
Motor controls
Fans
Heaters
Thermostats
Terminal blocks
Flasher controls
Receptacles
Generator receptacles
Transfer switches
Enclosure Options
Multiple sizes
Right hand or left hand hinge
Custom colors available
Additional sections may be added to house more components
The TESCONNEX® Sump Termination Panel by Tesco Controls, Inc. is a NEMA type 3RX cable entry cabinet with two physically separate sections designed to isolate potentially hazardous or corrosive sewage gasses from electrical cable termination points and vent the gasses to atmosphere.
With the cables joined at a termination block, the need to splice resin sealed cables is eliminated. The first section is a ventilated space suitable for a Class I, Div. II hazardous area. The second section includes pump cable termination blocks rated for a minimum of 150% of pump FLA. The panel itself is constructed of durable 316 stainless steel or powder-coated aluminum suitable for harsh industrial environments.
Built for scalability – L3000e expands to meet your needs
The L3000e was developed by Tesco Controls, Inc. to meet the needs of many types of operations, from small facilities to large multi-station treatment plants. The I/O configurations are customizable to meet facility requirements now and in the future. The L3000e gives you a choice of many I/O card types and chassis models with 3, 5, 12, or 24 card capacity. It supports hundreds of I/O points.
For efficient and effective water/wastewater systems, the L3000e provides automation, remote access monitoring, and control of vital systems. TESCO’s fully-automated L3000e also includes information management and the delivery of data, reports, and trends.
The L3000e is a powerful programmable logic controller specifically designed to meet the critical needs of the water and wastewater industries. It easily integrates into a wide range of applications, from simple standalone stations to elaborate networked systems.
The L3000e has unique built-in features and leading advancements designed for reliability, ease-of-use, and cost effectiveness. The fully-programmable L3000e, with multiple protocol compatibility and communication ports, offers the flexibility to utilize a wide range of equipment such as PLCs, OITs, instrumentation, power monitors, and radios. With I/O expansion modules, the L3000e becomes a perfect fit for remote standalone applications.
Continuous availability – QNX reliability
Equipped with a series of features to ensure continuous availability, the L3000e is a robust system built on the QNX® Neutrino® real-time operating system (RTOS). This system complies with the POSIX (Portable Operating System for Unix) standard and is the preferred choice for critical systems such as aerospace, air traffic control systems, surgical equipment, and nuclear power plants.
Open protocol – Integrate with other PLCs/Devices
The L3000g can be used as a gateway device with message pass-through abilities – between Ethernet and serial ports, to connect any combination of TESCO or Modbus® devices. It can be networked in a variety of ways with other third-party PLCs, operator interfaces, and SCADA systems. It supports cellular modem telemetry; Modbus® serial and TCP.
L3000 PLC / OIT Combination
L3000 4-card PLC
Benefits
View and modify registers and programs without a laptop
Integrate multiple vendor PLCs into one control system
Connect PLCs, OITs, instrumentation, power monitors and radios
Access and view documents from anywhere, using the integrated Web Serve
Built-in storage for documentation and drawing
View vital information using L3000 remote data login
Transfer data from PLC to PLC using flash drive & USB ports
Watchdog feature automatically restarts program
Data logging capabilities with no SCADA required
Expandable I/O modules allow for system growth
Features
Standard 5-year warranty
Real-time register data monitoring & trending
Choice of operator interface terminal (OIT) types
Flexible communications built-in
Battery backed/protected memory
Powerful WinBench64™ programming IDE
HDMI video port for TESCO Touchscreen display
High performance, integrated web server
Fast 1GHz processor
57,600 Kbs serial port full handshake and 10/100 Mbs Ethernet port
Open architecture (VME Bus, ISAGRAF, hardware, etc.)
USB and flash drive upload/download capability
Sophisticated data logger
Winbench64™ programming software
Multiple protocols
IEC 61131-3 compatible
Communications
Data Express, Data Express Plus
Modbus TCP/IP, Modbus Serial, DGH
Options
10-year warranty
Compact Brite Lite™ LED display
Full-size Brite Lite™ LED display
Touchscreen color HDMI display
EMASS® service agreements
TESCO Support
We offer world-class 24/7/365 support to keep you up and running in the event of a failure.
Spare in the Air Program: To expedite the repair process, TESCO will provide the parts you need by the next day. Return the failed part to us for repair. Five-year standard warranty. For additional protection, an optional ten-year warranty is available.
TESCOFLEX® low-profile, single-meter control panels, manufactured by Tesco Controls, Inc., are used for a wide variety of applications. The 24-200 single meter TESCOFLEX® low-profile control panel provides power distribution and metering rated for 120 to 480 volts; single phase or three phase applications; 1, 2 or 3 pole main breakers; and may be rated at 100 amp or 200 amp.
TESCOFLEX® panels are constructed of the highest grade of materials using hot-dipped galvanized steel, stainless steel, or aluminum. Our coatings will withstand the most stringent testing applied to outdoor enclosures and meet or exceed state specifications. The wide range of options we can provide will allow for maximum utilization of your space.
Applications
Airport beacon systems
Athletic field/stadium lighting
CATV termination
Cellular
Flashing beacon controls
Landscape irrigation
Parking lot lighting
Residential application
Sign lighting
Street lighting
Storm water lift stations
Tennis court lighting & control
Traffic signals
Waste water lift stations
Water pumping plants
Standard Features
Low Profile
No exposed fasteners
Hot-dipped galvanized steel, stainless steel or aluminum
Durable all-welded construction
UL approved copper cable bussing and control wiring
Circuit breakers cable-in cable-out type
Factory wired and tested before shipment
Meets EUSERC requirements (Electric Utility Service Equipment Requirements Committee)
Built to UL 508A standards
Pad-lockable 3-pt latch
Specifications
Main breakers shall be 1, 2 or 3 pole
May be rated 120 volt up to 480 volt
Single or three phase
May be rated at 100 amp or 200 amp
Continuous welded seams
Fully framed side hinged outer door for flush fit with top drip lip & closed cell neoprene flange compressed gaskets
Separate pull section
Service enclosure interior is fabricated from cold rolled steel and powder coated white
Full length deadfront with stainless steel hinge and ¼ turn latch & knurled knobs
Deadfront hinged on same side as the front door and opens up to 120 degrees
Completely prewired in the factory
Wiring will be to NEMA IIB standards showing external connections & external equipment
Enclosure Options
30x60x18
30x60x24
36x60x18
36x60x24
Right hand or left hand hinge
Custom colors available
Additional sections may be added to house more components
Additional options for vandalism protection available
May also be built as a dual meter
Component Options
Breakers
Contractors
Switches
Relays
Photo cells
Time clocks
Time delays
Transformers
Motor controls
Fans
Heaters
Thermostats
Terminal blocks
Flasher controls
Receptacles
Generator receptacles
Transfer switches
Standard Single-Meter Enclosure Sizes
Enclosure Catalog Number
Inches WxHxD
(*Millimeter)
24-000 306018
30 x 60 x 18
(762 x 1524 x 457)
24-000 306024
30 x 60 x 24
(762 x 1524 x 610)
24-000 366018
36 x 60 x 18
(915 x 1524 x 457)
24-000 366024
36 x 60 x 24
(915 x 1524 x 610)
*Millimeter dimensions are approximate
and for reference only; do not convert
metric dimensions to inch.
